Product Overview
Ansix Auto Water to Oil Oil Cooler Kit
When using an air to oil cooler, you can often have oil temps that are colder than you'd like. Even when you use a thermostatic sandwich plate, the oil temperatures during daily use might only get to about 75ºC (167 ºF). With our water to oil kit, your oil temperatures will stabilize with the coolant temp and consistently operate around 100ºC (212ºF). Below are some distinct advantages of using this kit:
Stable daily operating oil temperatures: The oil temperatures will stabilize with the coolant temp and consistently operate around 100ºC (212ºF).
On track performance: In our test car during a 15ºC (59 ºF) day, the car ran for 30 minutes continuously and the oil temperature never exceeded 108ºC (226 ºF). This is a substantial drop from the stock setup where on the same day, the oil temperature quickly went to 130ºC (266 ºF) within 8 minutes.
Removal of the stock heat exchanger: The stock heat exchanger on the FA24 has been measured to cause a substantial pressure drop. Our kit is designed to be used without stock heat exchanger to allow your engine to have higher oil pressure when compared to kits which keep the stock heat exchanger.
Ease of installation: This kit is very easy to install since you won't need to remove the bumper to install this kit.
Please note, this kit is designed to work with the stock intake box with the resonator deleted. It may not fit with many aftermarket intake systems including the GR performance intake.
The kit has now been updated with a new sandwich plate that's compatible with the OEM oil filter.
